How To Configure The Swimming Pool Water Pump To Save Money
Swimming pool circulating pump is the core equipment of swimming pool water treatment system, which promotes the circulation of pool water and plays a key role in the whole swimming pool circulation. What should we pay attention to when designing the circulating water pump for swimming pools?
（FENLIN HOT SELL SWIMMING POOL WATER PUMP↑）
When selecting a swimming pool pump, the flow rate and lift of the pump should be taken as the main selection parameters. It should be noted that the rated flow rate of the swimming pool circulating pump should be greater than or equal to the circulating water flow rate of the pool water circulating purification system to ensure the required flow rate of the pool water circulating cycle, and the lift of the pump should not be less than the lowest water level of the suction pool.
According to the national standard, the design cycle of swimming pool is 4 hours, so it is necessary to configure a standby pump for the alternate operation of the working pump to ensure the normal operation of the pump.
（FENLIN HOT SELL SWIMMING POOL WATER PUMP↑）
Secondly, the configuration of water pump must match the volume of swimming pool, the size and length of water pipe, the size of filter and other factors. If the pipeline is too small, when the water flows through the pipeline, the resistance will increase, and the water flow will be limited, which will not meet the circulating capacity of the pump, resulting in waste of power and increased operating costs.
（FENLIN swimming pool water pump production line↑）
It is best to use variable frequency pump for the circulating water pump of swimming pool, so that the intermediate frequency can be used at night, and the high frequency can be used for backwashing, thus greatly saving the operating cost. Secondly, the over-current parts of the swimming pool pump should be corrosion-resistant and the running noise should be low. FENLIN stainless steel water pump with high energy efficiency and low noise is further optimized from the aspects of hydraulic structure, material, design and configuration. Its motor shell is made of high-quality aluminum alloy, and the motor has built-in T1 heat protector, which can ensure safe and convenient use. Innovative internal design and precision casting process, special impeller pump cover, mechanical shaft seal, suitable for long-term operation, energy saving. It has the advantages of low noise, low vibration and long service life.
